Dyman Foams Logo - Custom Foam Manufacturer Brisbane

PH: (07) 3865 1400
Showroom: Mon-Thu 8am-4pm Fri 8am-2pm

Quick Foam Grade Reference

Compare foam grades by density, firmness and typical applications.

Grade Density (kg/mÂł) Firmness Typical Use
16-110 ~16 Soft Budget backs, headrests, overlays
23-130 ~23 Medium General seating, budget cushions
25-60 ~25 Very Soft Pillows, mattress overlays
30-110 ~30 Soft Mattresses, soft seating, overlays
30-130 ~30 Medium Premium seating, mattresses
35-200 ~35 Firm Commercial seating, heavy-use
EN40-230 CM5 ~40 Firm Transport seating, commercial
LR38-40 ~38-40 Very Soft Memory foam, mattress overlays

Scroll down for detailed specifications and full grade list.

Quick Filter: All Grades Seating Mattress/Bedding Outdoor / QDF Closed Cell
16-110 Vanilla

Description: Low Density soft non load-bearing foam used in price sensitive areas. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Utility grade for budget Backs, Headrests, Overlays & Quilting.

2080 Ă— 1920 mm
15.5 to 16.5 kg/mÂł
PropertySpecification
Tear Resistance350 N/m Min
Tensile Strength80 kPa Min
Elongation200% Min
Resilience40% Min
Compression Set (75%)10% Max
IFD 40% Range100 N Min – 120 N Max
IFD 25% Recovery60% Min
Sag Factor1.5 Min
AS2282.0 Tested Current: May 2017
19-130 Peach

Description: Low Density non load-bearing medium hardness foam for occasional use. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: General purpose grade for Arms, Backs and Seat cushioning.

2285 Ă— 2080 mm
18.0 to 19.5 kg/mÂł
PropertySpecification
Tear Resistance300 N/m Min
Tensile Strength85 kPa Min
Elongation175% Min
Resilience40% Min
Compression Set (75%)5% Max
IFD 40% Range115 N Min – 145 N Max
IFD 25% Recovery65% Min
Sag Factor1.75 Min
AS2282.0 Tested Current: May 2017
23-130 Light Grey

Description: Standard Density medium hardness foam used in Backs, Bedding and Seats. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Multipurpose grade for budget Seat Cushioning & Bedding. Not recommended for constant load bearing.

2285 Ă— 2080 mm
22.5 to 24.0 kg/mÂł
PropertySpecification
Tear Resistance400 N/m Min
Tensile Strength100 kPa Min
Elongation200% Min
Resilience45% Min
Compression Set (75%)5% Max
IFD 40% Range115 N Min – 145 N Max
IFD 25% Recovery65% Min
Sag Factor1.75 Min
AS2282.0 Tested Current: May 2017
25-60 White

Description: Premium Density Super Soft non load-bearing foam used in Backs and Head Rest applications. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: High Quality foam suitable for Cushion Overlays, Pillows & Mattress Overlays.

2080 Ă— 1850 mm
25.0 to 26.0 kg/mÂł
PropertySpecification
Tear Resistance250 N/m Min
Tensile Strength50 kPa Min
Elongation200% Min
Resilience45% Min
Compression Set (75%)5% Max
IFD 40% Range55 N Min – 75 N Max
IFD 25% Recovery75% Min
Sag Factor2.09 Min
AS2282.0 Tested Current: May 2017
25-80 Pale Yellow

Description: Premium Density non load-bearing soft foam suitable for everyday use. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Premium Grade used for Back Cushioning, Mattress Overlays.

2080 Ă— 1860 mm
28.0 to 29.0 kg/mÂł
PropertySpecification
Tear Resistance250 N/m Min
Tensile Strength60 kPa Min
Elongation200% Min
Resilience50% Min
Compression Set (75%)5% Max
IFD 40% Range70 N Min – 90 N Max
IFD 25% Recovery75% Min
Sag Factor1.88 Min
AS2282.0 Tested Current: Nov 2016
25-150 Yellow

Description: Medium Density medium to firm hardness foam used in Arms and Seats. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Multipurpose grade for Budget Cushioning or Supportive Convoluted Mattress Overlays.

2285 Ă— 2080 mm
23.0 to 24.5 kg/mÂł
PropertySpecification
Tear Resistance300 N/m Min
Tensile Strength75 kPa Min
Elongation150% Min
Resilience40% Min
Compression Set (75%)10% Max
IFD 40% Range145 N Min – 175 N Max
IFD 25% Recovery60% Min
Sag Factor1.7 Min
AS2282.0 Tested Current: May 2017
27-200 Green

Description: Medium Density firm foam used in seating and load bearing applications. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Multipurpose grade for General Upholstery, Goal Post Protectors and Packaging.

2285 Ă— 2080 mm
26.0 to 27.0 kg/mÂł
PropertySpecification
Tear Resistance250 N/m Min
Tensile Strength75 kPa Min
Elongation150% Min
Resilience35% Min
Compression Set (75%)10% Max
IFD 40% Range180 N Min – 220 N Max
IFD 25% Recovery60% Min
Sag Factor1.7 Min
AS2282.0 Tested Current: May 2017
S28-70 CM Black

Description: Specialised foam used for Sound Absorption, Sound Recording and Sound Buffering.

Applications: Acoustic dampening, studio recording, and noise control panels.

2000 Ă— 1550 mm
28.0 to 29.0 kg/mÂł

Average Sound Absorption Co-efficient (25mm sample)

125Hz: 0.10 | 250Hz: 0.20 | 500Hz: 0.55
1000Hz: 0.93 | 2000Hz: 0.88 | 4000Hz: 0.82

Flammability Standard

UL94 HF-1 (In-house lab test classification standard)

PropertySpecification
Tear Resistance450 N/m Min
Tensile Strength100 kPa Min
Elongation200% Min
Resilience50% Min
Compression Set (50%)20% Max
IFD 40% Minimum140 N Min
Sag Factor1.80 Min
AS2282.0 Tested Current: 2006
29-400 Black

Description: Medium Density extra firm foam for impact cushioning, load bearing and shock absorption applications. Incorporating Ultrafresh™.

Applications: General purpose firm foam for Instrument & Glassware Packaging, Domestic noise absorption panels.

2080 Ă— 1880 mm
28.0 to 31.0 kg/mÂł
PropertySpecification
Tear Resistance400 N/m Min
Tensile Strength180 kPa Min
Elongation110% Min
Resilience30% Min
Compression Set (75%)10% Max
IFD 40% Range350 N Min – 450 N Max
IFD 25% Recovery58% Min
Sag Factor1.85 Min
AS2282.0 Tested Current: May 2017
30-110 Pink

Description: Premium Density soft to medium hardness foam suitable for everyday use. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Premium Grade used for Back Cushioning, Mattresses, Overlays and Soft Seating.

2080 Ă— 1880 mm
29.0 to 31.0 kg/mÂł
PropertySpecification
Tear Resistance100 N/m Min
Tensile Strength85 kPa Min
Elongation100% Min
Resilience55% Min
Compression Set (75%)15% Max
IFD 40% Range100 N Min – 125 N Max
IFD 25% Recovery75% Min
Sag Factor1.75 Min
AS2282.0 Tested Current: May 2017
30-130 Blue

Description: Premium Density medium hardness foam suitable for everyday use. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Premium Grade used for Mattresses and Seating.

2080 Ă— 1880 mm
29.0 to 31.0 kg/mÂł
PropertySpecification
Tear Resistance250 N/m Min
Tensile Strength85 kPa Min
Elongation200% Min
Resilience45% Min
Compression Set (75%)5% Max
IFD 40% Range115 N Min – 145 N Max
IFD 25% Recovery75% Min
Sag Factor1.7 Min
AS2282.0 Tested Current: May 2017
31-320 Vanilla

Description: Medium Density extra firm foam for impact cushioning, load bearing and shock absorption applications. Incorporating Ultrafresh™.

Applications: General purpose firm foam for Waterbed Frames and Reinforcing.

2080 Ă— 1880 mm
30.0 to 32.0 kg/mÂł
PropertySpecification
Tear Resistance350 N/m Min
Tensile Strength150 kPa Min
Elongation125% Min
Resilience35% Min
Compression Set (75%)5% Max
IFD 40% Range300 N Min – 350 N Max
IFD 25% Recovery60% Min
Sag Factor1.60 Min
AS2282.0 Tested Current: Nov 2016
35-200 Steel Blue

Description: Heavy Premium Density firm foam suitable for everyday use in high load-bearing applications. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Commercial Seating.

2285 Ă— 2080 mm
31.0 to 32.0 kg/mÂł
PropertySpecification
Tear Resistance200 N/m Min
Tensile Strength110 kPa Min
Elongation140% Min
Resilience40% Min
Compression Set (75%)8% Max
IFD 40% Range180 N Min – 220 N Max
IFD 25% Recovery60% Min
Sag Factor1.75 Min
AS2282.0 Tested Current: May 2017
EN35-230 CM2 Dark Grey

Description: Heavy Premium Density firm foam used in Commercial Seating and High load-bearing applications. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Banquet and Bus Seating.

2080 Ă— 1880 mm
34.0 to 36.0 kg/mÂł

Flammability Certification

Tested to BS5852 / Source 2 mod (Gas flame source 2 - Pass)

PropertySpecification
Tear Resistance350 N/m Min
Tensile Strength130 kPa Min
Elongation125% Min
Resilience30% Min
Compression Set (75%)8% Max
IFD 40% Range210 N Min – 250 N Max
IFD 25% Recovery60% Min
Sag Factor1.76 Min
AS2282.0 Tested Current: Nov 2016
35-600 Salmon

Description: Premium Density extra firm foam used in Very high-load bearing & reinforcing applications. Incorporating Ultrafresh™.

Applications: Gym Mats, Shock Absorption pads and firm packaging foam.

2080 Ă— 1880 mm
35.0 to 37.0 kg/mÂł
PropertySpecification
Tear Resistance280 N/m Min
Tensile Strength200 kPa Min
Elongation120% Min
Resilience30% Min
Compression Set (75%)10% Max
IFD 40% Range550 N Min – 650 N Max
IFD 25% Recovery60% Min
Sag Factor1.60 Min
AS2282.0 Tested Current: Nov 2016
EN36-90 CM5 Light Green

Description: Heavy Premium Density soft foam used in Commercial Back and Seat cushions. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Mattresses & Seating. (Not recommended for stretching/stapling).

2080 Ă— 1880 mm
35.0 to 37.5 kg/mÂł

Multi-Standard Flame Certified

• AS1530 Pt.3 (18/0/0/5) | BS5852 Source 5 Mod (PASS)
• CAL 117 Sec 3 (MEETS) | FAR 25.853 (MEETS)
• AS/NZS 3744.3 Source 2 (PASS)

PropertySpecification
Tear Resistance150 N/m Min
Tensile Strength60 kPa Min
Elongation90% Min
Resilience50% Min
Compression Set (75%)8% Max
IFD 40% Range80 N Min – 120 N Max
IFD 25% Recovery75% Min
Sag Factor2.4 Min
AS2282.0 Tested Current: Nov 2016
EN36-130 CM5 Yellow

Description: Heavy Premium Density Medium Hardness foam used in Commercial Seating cushions and Mattresses. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Mattresses & Seating. (Not recommended for stretching/stapling).

2080 Ă— 1880 mm
35.0 to 37.5 kg/mÂł

Multi-Standard Flame Certified

• AS1530 Pt.3 (18/0/0/4) | BS5852 Source 5 Mod (PASS)
• CAL 117 Sec 3 (MEETS) | FAR 25.853 (MEETS)
• AS/NZS 3744.3 Source 2 (PASS)

PropertySpecification
Tear Resistance160 N/m Min
Tensile Strength70 kPa Min
Elongation140% Min
Resilience55% Min
Compression Set (75%)8% Max
IFD 40% Range140 N Min – 160 N Max
IFD 25% Recovery75% Min
Sag Factor2.4 Min
AS2282.0 Tested Current: Oct 2018
LR38-40 White

Description: Premium Density Very Soft Low Resilience non load-bearing foam suitable for everyday use. Incorporating Ultrafresh™.

Applications: Premium Grade used for Mattress Overlays, Pillows and Seat Cushion Overlays.

2080 Ă— 1880 mm
37.0 to 40.0 kg/mÂł
PropertySpecification
Tear Resistance150 N/m Min
Tensile Strength60 kPa Min
Elongation200% Min
Resilience10% Max
Compression Set (75%)10% Max
IFD 40% Range35 N Min – 55 N Max
IFD 25% Recovery70% Min
Sag Factor2.20 Min
AS2282.0 Tested Current: Nov 2016
HG39-115 CM2 Orange

Description: Heavy Premium Density soft foam used in Mattresses. Incorporating Ultrafresh™ for antimicrobial protection.

Applications: Very High Quality Grade used for Mattresses & Seating.

2080 Ă— 1860 mm
38.0 to 40.0 kg/mÂł

Flame Resistance Certification

• AS/NZS 4088.1 (Smouldering cigarette - PASS)
• AS/NZS 3744.3 (160ml/min gas flame Source 2 - PASS)
• CAL 117 Sec 3 (MEETS)

PropertySpecification
Tear Resistance200 N/m Min
Tensile Strength70 kPa Min
Elongation150% Min
Resilience45% Min
Compression Set (75%)8% Max
IFD 40% Range100 N Min – 130 N Max
IFD 25% Recovery75% Min
Sag Factor1.77 Min
AS2282.0 Tested Current: Nov 2016
HG39-140 CM2 Aqua

Description: Heavy Premium Density medium to firm foam used in Mattresses. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Mattresses & Seating.

2080 Ă— 1860 mm
38.0 to 40.0 kg/mÂł

Flame Resistance Certification

• AS/NZS 4088.1 (Smouldering cigarette - PASS)
• AS/NZS 3744.3 (160ml/min gas flame Source 2 - PASS)
• CAL 117 Sec 3 (MEETS)

PropertySpecification
Tear Resistance200 N/m Min
Tensile Strength70 kPa Min
Elongation150% Min
Resilience45% Min
Compression Set (75%)8% Max
IFD 40% Range125 N Min – 155 N Max
IFD 25% Recovery70% Min
Sag Factor1.78 Min
AS2282.0 Tested Current: Nov 2016
HG39-170 CM2 Ruby Red

Description: Heavy Premium Density firm foam used in Mattresses. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Mattresses & Seating.

2080 Ă— 1860 mm
38.0 to 40.0 kg/mÂł

Flame Resistance Certification

• AS/NZS 4088.1 (Smouldering cigarette - PASS)
• AS/NZS 3744.3 (160ml/min gas flame Source 2 - PASS)
• CAL 117 Sec 3 (MEETS)

PropertySpecification
Tear Resistance200 N/m Min
Tensile Strength70 kPa Min
Elongation150% Min
Resilience45% Min
Compression Set (75%)8% Max
IFD 40% Range155 N Min – 185 N Max
IFD 25% Recovery70% Min
Sag Factor1.77 Min
AS2282.0 Tested Current: Nov 2016
EN40-230 CM5 Light Gold

Description: Heavy Premium Density firm foam used in Commercial Seating Cushions. Suitable for high usage. Incorporating Ultrafresh™.

Applications: Very High Quality Grade used for Transport Seating. (Not recommended for stretching/stapling).

2080 Ă— 1880 mm
39.0 to 42.0 kg/mÂł

Multi-Standard Flame Certified

• AS1530 Pt.3 (16/0/0/6) | BS5852 Source 5 Mod (PASS)
• CAL 117 Sec 3 (MEETS) | FAR 25.853 (MEETS)
• AS/NZS 3744.3 Source 2 (PASS)

PropertySpecification
Tear Resistance180 N/m Min
Tensile Strength100 kPa Min
Elongation90% Min
Resilience45% Min
Compression Set (75%)8% Max
IFD 40% Range210 N Min – 250 N Max
IFD 25% Recovery75% Min
Sag Factor2.3 Min
AS2282.0 Tested Current: Nov 2016
Quick Dry SOFT Lime

Description: Advanced reticulated polyurethane foam with open cells for maximum water drainage & air circulation. Incorporating UreGard antimicrobial formula.

Applications: Outdoor furniture exposed to rain and marine environments requiring rapid drying (best up to 100mm thickness).

2400 Ă— 1300 mm
> 24 kg/mÂł
PropertySpecification
Tensile Strength> 0.6 kg/cm²
Elongation> 100% Min to > 200% Max
PPI Count20 – 30 Cell / 25mm
Operating Temp-14°C Min to 140°C Max
NoteNot for fish tanks/ponds
ASTM D3574 Tested Current: Jan 2016
Quick Dry FIRM Light Orange

Description: High-performance reticulated polyurethane foam designed for outdoor cushions. Open cell structure permits maximum water drainage.

Applications: Outdoor & marine seating demanding firm feel and quick-drying capability (best up to 100mm thickness).

2400 Ă— 1300 mm
> 28 kg/mÂł
PropertySpecification
Tensile Strength> 0.6 kg/cm²
Elongation> 100% Min to > 200% Max
PPI Count20 – 30 Cell / 25mm
Operating Temp-14°C Min to 140°C Max
NoteNot for fish tanks/ponds
ASTM D3574 Tested Current: Jan 2016
EVA 30 Closed Cell Blue

Description: Closed cell EVA foam combining excellent shock absorption with prompt deflection recovery. Impervious to mildew, mould, rot & bacteria.

Applications: Chemical resistant, thermal insulation, shock absorption, and high buoyancy marine/industrial uses.

2000 Ă— 1000 mm
30 kg/mÂł
PropertySpecification
Tear Strength20 N/cm
Tensile Strength0.3 MPa
Elongation @ Break250 – 300%
Compression Set< 10% Max
Hardness15
Water Absorption< 0.002 g/cmÂł
Thermal Conductivity0.04 W/m/°C
Compression Deflection40 KPa
Operating Temp-70°C Min to 70°C Max
ASTM D3575 / JIS Tested Current: Sept 2013
PE 30 Closed Cell Black

Description: Closed cell Polyethylene (PE) foam with tough, firm elastic feel. Highest shock absorption capacity and superior chemical/UV weather resistance.

Applications: Extreme exposure heat/weather/water protection, high deflection cycle cushioning, thermal insulation, buoyancy.

2000 Ă— 1000 mm
28 to 33 kg/mÂł
PropertySpecification
Tear Strength14.28 N/cm
Tensile Strength0.33 MPa
Elongation @ Break150 – 200%
Compression Set< 5% Max
Hardness22 – 27
Water Absorption< 0.002 g/cmÂł
Thermal Conductivity0.04 W/m/°C
Compression Deflection41 KPa
Operating Temp-70°C Min to 70°C Max
ASTM D3575 / JIS Tested Current: Sept 2013